ScreenBeam 1000 Safety Guidelines and Warnings

This article applies to the following ScreenBeam products:

Follow the guidelines in this article to ensure proper operation and safe use of ScreenBeam 1000.

This product is intended to be supplied by a Listed Direct Plug-In Power Unit marked “Class 2”, Listed Power Adapter or DC power source marked “L.P.S.” (or “Limited Power Source”) model #CDS036-W120U and rated 12Vdc, 3A minimum.
This product is designed for indoor use only within operating temperature of 0 to 40C (32 - 104F).
Do not spill food or liquids on the product.
Do not mount, install, or place the product and connected cable(s) close to a wet surface.
Keep the product away from heat or ventilation sources such as projector's vent. Also, do not block the cooling vents.
If any of the following conditions occur, carefully unplug the product from the electrical outlet and replace the part or contact your dealer.
- The product was exposed to water.
- The power adapter, its cable, or its connector is damaged.
- The product produces a foul (sulfur-like) smell.