This article applies to the following ScreenBeam products:

Use Digital Signage on your ScreenBeam receiver to display dynamic content on your display while the receiver is idle. In this article we will guide you in creating content using Google Slides, and then enabling the Digital Signage feature on your receiver to start displaying your content.

Section 1: Create Your Digital Signage Content
Section 2: Enable Digital Signage on the ScreenBeam Receiver

Create Digital Signage Content

Use Google Slides to Create Digital Signage Content

This section will use Google Slides as an example of one method to use for Digital Signage content creation. You may use any service you would like, as long as the content is published and available on the web.

Create and Publish Google Slides

Use Google Slides to create your Digital Signage content.

1.	Open your browser to https://slides.google.com and create a new presentation
2.	Use the Google Slides editor to create the presentation you would like to use for digital signage. You can include videos in your slides, just be sure to set the Format Options of the Video Playback section to Play (automatically) and select the checkbox to Mute audio.
3.	Once the slides are complete, go to File → Publish to the web
4.	In the Publish to the web window, select Embed. Choose the options for your presentation and then click Publish. Note: It is recommended to check the boxes for both Start slideshow as soon as the play loads and Restart the slideshow after the last slide. You must have more than one slide for the Restart the slideshow after the last slide option to work.
5.	Once you click Publish, some code will appear in the window. Copy this code to a text editor as we will need to parse this text for the URL to use for Digital Signage.
6.	From the text editor, copy the entire URL that appears after src= and in between the first set of quotes.
7.	Shorten the URL. Open your browser to https://tinyurl.com. Enter the URL copied from the previous step to the entry box and click on the Make TinyURL! button. Note down the resulting tiny URL. Note: The tiny URL will be in the format https://tinyurl.com/xxxxxxx

Enable Digital Signage

Using Digital Signage

Enable Digital Signage on your receiver and point it to the content URL you would like to display. Once enabled, the Ready screen on your receiver will change so that it can display your digital signage content.

Enable Digital Signage from the Local Management Interface

1.	Connect to the ScreenBeam access point on your laptop or PC. Open the browser to the URL http://192.168.26.1. This will open the ScreenBeam receiver Local Management Interface page. Note: By default the ScreenBeam access point name will be in the format AP-xxxxxx where xxxxxx is a unique 6 character ID for your device.
2.	Navigate to the Digital Signage tab. Select Enable for Digital Signage. Select the Display Mode and enter your content’s URL in the Source URL field. Enter the number of seconds before the Digital Signage content starts to display in the Restart Delay field. Click Apply to save your configuration.
3.	After applying the changes, click Refresh and verify the Source URL is set correctly.
4.	Once configured the settings will take effect immediately. The Digital Signage content will appear on the screen.

Articles in this section

How To Use Digital Signage