This article applies to the following ScreenBeam products:
Current ScreenBeam models do not support PoE. For installment where only PoE is available, a PoE Splitter can be used to deliver power and network to ScreenBeam receiver.
PoE Splitter specifications must meet the following requirements
- PoE+ PD Device (PoE+ Splitter)
- Supports IEEE 802.3at/af PoE+ Standard
- Supports Gigabit Ethernet up to 100meters
- Power output
- 12V DC up to 25.5W with a 5.5 mm power plug for ScreenBeam model 1100 Plus/1100/1000
- 5V DC up to 10W with a 3.8 mm power plug for ScreenBeam model 960/750
Recommended PoE+ Splitter
The 1000, 1100, and 1100 Plus model cannot support 3 full loaded USB ports.