ScreenBeam MultiBeam - Split and extend AV over IP or Wi-Fi Direct

Introduction

ScreenBeam MultiBeam allows you to distribute a wireless display or an HDMI video from the Primary receiver to multiple Remote receivers, over the IP or over Wi-Fi Direct or a combination both networks, up to 4k30p resolution.  The presenter content can be shared across multiple displays at an ultra-low latency.

Features

• Enables ScreenBeam 1100P receiver to split and extend AV signal over IP
• IT configurable; select any 1100P receiver as the primary receiver and up to 8 as remote receivers for a MultiBeam cluster
• IP Multicast over the network; works via Ethernet or Wi-Fi Direct or a combination of both
• Ultra-low latency, and up to 4k/30 resolution for 4 remote receivers or 1080p/30 for 8 remote receivers
• Manageable cluster via ScreenBeam Service Platform within Central Management Server (SPCMS)
• Primary receiver supports screen mirroring of Miracast, Airplay, Chromecast, and wired HDMI input
• Remote receiver can be configured as Dedicated or Multi-function

Application

• Conference Room
• Training Room
• Lecture Hall
• Classroom 
• House of Worship

Requirements

Ensure that the following requirements are met:

• Two or more ScreenBeam 1100 Plus Wireless Display Receiver (with firmware 11.1.13.0 or later) are available
• ScreenBeam CMS Enterprise (version 4.3.9.0 or later) is available
• Four consecutive communication ports (default: 24035-24038) is available
• Deployment of ScreenBeam 1100 Plus receivers is completed